Publicacions de Tecnologia de Materials
 
  • Publications in Journals:

    • M. Vilaseca, S. Molas, D. Casellas, “High temperature tribological behaviour of tool steels during sliding against aluminium”, Wear, 272 (2011) 105-109

    • J. Caro, N. Cuadrado, I. González, D. Casellas, J.M. Prado, A. Vilajoana, P. Artús, S. Peris, A. Carrilero, J.C. Dürsteler, “Microscratch resistance of ophthalmic coatings on organic lenses”, Surface & Coatings Technology, 205 (2011) 5040-5052

    • E. Martínez-González, I. Picas, D. Casellas, J. Romeu, “Analysis of fracture resistance of tool steels by means of Acoustic Emission”, Journal of Acoustic Emission, 28 (2010) 163-169.

    • I. Picas, N. Cuadrado, D. Casellas, A. Goez, L. Llanes, “Microstructural effects on the fatigue crack nucleation in cold work tool steels”, Procedia Engineering, 2 (2010) 1777-85.

    • L. Suarez, J. A. Benito, P.R.Calvillo, D. Casellas, Y. Houbaert, R. Petrov and J. M. Prado, “The Influence of Deformation on Microstructure Evolution of Low Alloy TRIP Steel”, Materials Science Forum, 638-642 (2010) 3531-3536.

    • D. Gutiérrez, A. Lara, D. Casellas, J.M. Prado, “Effect of strain paths on formability evaluation of TRIP steels”, Advanced Materials Research, 89-91 (2010) 214-219

    • M.D. Riera, M.G. Coussirat, A.J. Guardo, I. Valls, D. Casellas, “Simulation of hot stamping processes”, Steel Grips 7 (1) (2009) 49-54

    • I. Buj, J. Torras, D. Casellas, M. Rovira, “Effect of heavy metals and water content on the strength of magnesium phosphate cements”, Journal of Hazardous Materials170 (1) (2009) 345-350

    • M. Tijero, G. Gabriel, J. Caro, A. Altuna, R. Hernández, R. Villa, J. Berganzo, F.J. Blanco, R. Salido, L. J. Fernández, “SU-8 microprobe with microelectrodes for monitoring electrical impedance in living tissues”, Biosensors and Bioelectronics, 24 (2009) 2410-2416.

    • Y. Y. Santana, J. G. La Barbera-Sosa, J. Caro, E. S. Puchi-Cabrera, M. H. Staia., “Mechanical properties and microstructure of WC-10Co-4Cr and WC-12Co Thermal Spray Coatings deposited by HVOF”, Surface Engineering, 24(5) (2008) 374-382

    • R. Tejedor, R. Rodríguez-Baracaldo, J. A. Benito, J. Caro, J. M. Cabrera, “Influence of the carbon content on the strain rate sensitivity of nanocrystalline steels”, Scripta Materialia, 59 (2008) 631-634.

    • J. G. La Barbera-Sosa, Y. Y. Santana, M. H. Staia, D. Chicot, J. Lesage, J. Caro, G. Mesmacque, E. S. Puchi-Cabrera, “Microstructural and mechanical characterization of Ni-base thermal spray coatings deposited by HVOF”, Surface and Coatings Technology, 202 (2008) 4552-4559.

    • R. Rodríguez-Baracaldo, J. A. Benito, J. Caro, J. M. Cabrera, J. M. Prado. “Strain rate sensitivity of nanocrystalline and ultrafine grained steel obtained by mechanical attrition”. Materials Science and Engineering A, 485 (2008) 325-333.

    • D. Casellas, J. Caro, S. Molas, I. Valls, J,M, Prado, “Fracture toughness of carbides in tool steels evaluated by nanoindentation”, Acta Materialia 55 (13), (2007) 4277-4286

    • R. Hernández, M.R. Cruz, D. Casellas, M.D. Riera, J,M, Prado, “Evaluación del comportamiento a desgaste en aceros de herramienta: simulación por ordenador y verificación experimental”, Anales de Mecánica de la Fractura 24-II (2007) 619-623

    • G. Gabriel, I. Erill, J. Caro, R. Gómez, D. Riera, R. Villa, P. Godignon, Manufacturing and full characterization of silicon carbide-based multi-sensor micro-probes for biomedical applications”, Microelectronics Journal 38 (2007) 406-415.

    • J. Pérez-Mariano, K-H. Lau, A. Sanjurjo, J. Caro, J.M. Prado, C. Colominas “Multilayer Coatings by Chemical Vapor Deposition in a Fluidized Bed Reactor at Atmospheric Pressure (AP/FBR-CVD): TiN/TaN and TiN/W”. Surface and Coatings Technology, 201 (2006) 2174-2180.

    • J. Pérez-Mariano, K-H. Lau, A. Sanjurjo, J. Caro, D. Casellas, C. Colominas, “TiSiN nanocomposite coatings by Chemical Vapor Deposition in a Fluidized Bed Reactor at Atmospheric Pressure (AP/FBR-CVD)”, Surface and Coatings Technology, 201 (2006) 2217-2225

    • J. Pérez-Mariano, J. Caro, C. Colominas.” TiN/SiNx submicronic multilayer coatings obtained by chemical vapor deposition in a fluidized bed reactor at atmospheric pressure (AP/FBR-CVD)”, Surface and Coatings Technology, 201 (2006) 4021-4025.

    • D. Casellas, M.M. Nagl, L. Llanes and M. Angalda, “Title: Microstructural coarsening of Zirconia Toughened Alumina Composites”, Journal of the American Ceramic Society, 88 (2005) 1958-1963

    • D. Casellas, R. Pérez and J.M. Prado, “Fatigue variability in Al-Si cast alloys”, Materials Science and Engineering A, 398 (2005) 171-179

    • D. Casellas, A. Beltrán, J.M. Prado, A. Larson and A. Romero, “Microstructural effects on the dry wear resistance of powdermetallurgy Al-Si alloys”, Wear, 257 (2004) 730-739


  • Publications in Conferences:

    • Autores (p.o. de firma): N. cuadrado, D. Casellas, L.Llanes, I. Gonzalez, J. Caro Título: Effect of crystal anisotropy on the mechanical properties of WC embedded in WC-Co cemented carbides Tipo de participación: oral Congreso: Euro PM2001 Powder Metallurgy Congress & Exhibition Publicación: Proceedings of the Euro PM2011 Powder Metallurgy Congress & Exhibition Vol. I (ISBN 978-1-899072-20-0) Lugar celebración: Barcelona Fecha: 10/2011

    • Autores (p.o. de firma): A. Hamasaaid, I. Valls, H. Eibish, S. Molas, D. Casellas, G. Dour Título: High thermal conductivity tool steel for die casting of light alloys: benefits and potentials Tipo de participación: oral Congreso: NADCA Die Casting Conference and Tabletop Publicación: Lugar celebración: Columbus, OH (EUA) Fecha: 9/2011

    • Autores (p.o. de firma): J. Pujante, M. Vilaseca, K. Eriksson, J. Clobes, M. Alsmann, D. Casellas Título: Wear mechanism identification on hot stamping tools Tipo de participación: oral Congreso: International Conference on Hot Sheet Metal Forming of High-Performance steel Publicación: Proceedings of the 3rd International Conference on Hot Sheet Metal Forming of High-Performance steel (ISBN 978-3-942267-17-5) Lugar celebración: Kassel (Germany) Fecha: 6/2011

    • Autores (p.o. de firma): I. Picas, R. Muñoz, A. Lara, R. Hernández, D. Casellas Título: Effect of the cutting process in the mechanical and fatigue properties of press hardened 22MnB5 steel Tipo de participación: oral Congreso: International Conference on Hot Sheet Metal Forming of High-Performance steel Publicación: Proceedings of the 3rd International Conference on Hot Sheet Metal Forming of High-Performance steel (ISBN 978-3-942267-17-5) Lugar celebración: Kassel (Germany) Fecha: 6/2011

    • Autores (p.o. de firma): R. Muñoz, T. Lara, D. Casellas Título: Fracture toughness characterization of advanced high strength steels Tipo de participación: oral Congreso IDDRG 2011 International Conference Publicación: Proceedings of the IDDRG 2011 International Conference Lugar celebración: Bilbao Fecha: 6/2011

    • Autores (p.o. de firma): I. Picas, R. Hernandez, D. Casellas, I. Valls Título: Influence of the microsctructure in the tribo-mechanical behavior of UHSS cutting tools Tipo de participación: oral Congreso IDDRG 2011 International Conference Publicación: Proceedings of the IDDRG 2011 International Conference Lugar celebración: Bilbao Fecha: 6/2011

    • Autores (p.o. de firma): D. Gutierrez, J, Escaler, A. Lara, D. Casellas, J.M. Prado Título: Strategies to improve stretch-flangeability in advanced high strength steels Tipo de participación: oral Congreso IDDRG 2011 International Conference Publicación: Proceedings of the IDDRG 2011 International Conference Lugar celebración: Bilbao Fecha: 6/2011

    • Autores (p.o. de firma): N. Cuadrado, E. Giménez-Piqué, D. Casellas, M. Anglada Título: Estudio de la morfología de grietas generadas por nanoindentación y su efecto en el cálculo de la tenacidad de fractura Tipo de participación: oral Congreso XXVIII Encuentro del grupo español de fractura Publicación: XXVIII Encuentro del grupo español de fractura, pag 755-760 (2011) ISSN 0213-3725 Lugar celebración: Gijón Fecha: 4/2011

    • Autores (p.o. de firma): I. Picas, N. Cuadrado, D. Casellas, A. Goez, L. Llanes Título: Efecto de la microestructura en la nucleación y propagación de fisuras en aceros de herramienta de trabajo en frío Tipo de participación: oral Congreso XXVIII Encuentro del grupo español de fractura Publicación: XXVIII Encuentro del grupo español de fractura, pag 217-222 (2011) ISSN 0213-3725 Lugar celebración: Gijón Fecha: 4/2011

    • Autores (p.o. de firma): A. Ingebrand, T. Laumann, I. Valls, S. Molas, D. Casellas Título: Improvement of hard cutting by use of innovative HWS – tool steel Tipo de participación: oral Congreso Forum Stanztechnik Publicación: Lugar celebración: Düsseldorf (Germany) Fecha: 12/2010

    • Autores (p.o. de firma): E. Martínez-González, J. Romeu, I. Picas, D. Casellas Título: Aplicación de Emisión Acústica (EA) al estudio del comportamiento micro-mecánico de los AHSS Tipo de participación: oral Congreso XVII Congreso Nacional de Ingeniería Publicación: Actas del XVII Congreso Nacional de Ingeniería Mecánica Lugar celebración: Ciudad Real Fecha: 11/2010

    • Autores (p.o. de firma): M. Vilaseca, J. Pujante, S. Molas, D. Casellas Título: Comportamiento tribológico a alta temperatura de aceros de herramienta: aplicabilidad de recubrimientos en moldes de inyección de aluminio Tipo de participación: oral Congreso TRATERMAT 2010 Publicación: XII Congreso Nacional de Tratamientos Térmicos y de Superficie TRATERMAT 2010 (Eds. R Rodríguez, J.A. García) pp 113-122 Lugar celebración: Pamplona Fecha: 10/2010

    • Autores (p.o. de firma): I. Picas, N. Cuadrado, D. Casellas, A. Goez, L. Llanes Título: Influence de la microstructure dans les mécanismes de nucléation de fissures de fatigue dans des aciers pour outils de travail à froid Tipo de participación: oral Congreso: MATÉRIAUX 2010 Publicación: Lugar celebración: Nantes (Francia) Fecha: 10/2010

    • Autores (p.o. de firma): E. Martínez-González, I. Picas, D. Casellas, J. Romeu Título: Analysis of fracture resistance of tool steels by means of Acoustic Emission Tipo de participación: oral Congreso: EWGAE 2010 Publicación: Lugar celebración: Viena (Austria) Fecha: 09/2010

    • Autores (p.o. de firma): N. Cuadrado, D. Casellas, M. Anglada, J. Caro Título: Fracture toughness measurements in small hard particles by nanoindentation using cube-corner indenters Tipo de participación: poster Congreso Nanomeasure 2010 Publicación: Lugar celebración: Cracovia (Polonia) Fecha: 6/2010

    • Autores (p.o. de firma): M A. Montealegre, G. Castro, J.L. Arias, P. Vázquez, F. Bouzada, D. Casellas, J. Caro Título: Aumento de las propiedades en superficie de un acero estructural median recargue laser de satellite 6, inconel 625 y acero 1.3343 Tipo de participación: poster Congreso: XI Congreso Nacional de Materiales Publicación: Resúmenes del XI Congreso Nacional de Materiales Lugar celebración: : Zaragoza, España Fecha: : 6 / 2010

    • Autores (p.o. de firma): A. Góez, I. Picas, I. Valls, D. Casellas, L. Llanes Título: Efecto de la microestructura en la anisotropia a fractura y fatiga de aceros e herramientas para trabajo en frío Tipo de participación: oral Congreso: XI Congreso Nacional de Materiales Publicación: Resúmenes del XI Congreso Nacional de Materiales Lugar celebración: : Zaragoza, España Fecha: : 6 / 2010

    • Autores (p.o. de firma): S.Molas, G. Ramirez, D. Casellas, I. Valls, F. Montalà, L. Llanes Título: Estudio de la resistencia al rayado de aceros maraging recubiertos Tipo de participación: poster Congreso: XI Congreso Nacional de Materiales Publicación: Resúmenes del XI Congreso Nacional de Materiales Lugar celebración: : Zaragoza, España Fecha: : 6 / 2010

    • Autores (p.o. de firma): I. Picas, N. Cuadrado, D. Casellas, A. Goez, L. Llanes Título: Microstructural effects on the fatigue crack nucleation in cold work tool steels Tipo de participación: oral Congreso FATIGUE 2010 Publicación: Procedia Engineering, 2 (2010) 1777-1785 Lugar celebración: Praga (Rep. Checa) Fecha: 06/2010

    • Autores: M. Vilaseca, S. Molas, D.Casellas Título: High temperature tribological behaviour of tool steels during sliding against aluminium Tipo de participación: Oral Congreso: 14th Nordic Symposium on Tribology NORDTRIB 2010 Publicación: Proceedings of 14th Nordic Symposium on Tribology NORDTRIB 2010 Lugar de celebración: Storforsen (Suecia) Fecha: 6/2010

    • Autores (p.o. de firma): D. Gutiérrez, A. Lara, D. Casellas, J.M. Prado Título: Application of optical strain measuring systems to determine plastic anisotropy and theoretical forming limit curves in AHSS Tipo de participación: oral Congreso: IDDRG 50th Anniversary Conference: Tools and Technologies for the Processing of Ultra High Strength Steels Publicación: 50th Anniversary Conference: Tools and Technologies for the Processing of Ultra High Strength Steels, IDDRG 2010 Conference Proceedings (ISBN 978-3-85125-108-1) Lugar celebración: Graz (Austria) Fecha: 06/2010

    • Autores (p.o. de firma): I. Picas, R. Hernández, D. Casellas, I. Valls Título: Strategies to increase the tool performance in punching operations of UHSS Tipo de participación: oral Congreso: IDDRG 50th Anniversary Conference: Tools and Technologies for the Processing of Ultra High Strength Steels Publicación: 50th Anniversary Conference: Tools and Technologies for the Processing of Ultra High Strength Steels, IDDRG 2010 Conference Proceedings (ISBN 978-3-85125-108-1) Lugar celebración: Graz (Austria) Fecha: 06/2010

    • Autores (p.o. de firma): T. Laumann, I. Picas, M. Grané, D. Casellas, M.D. Riera, I. Valls Título: Hard cutting of tailored hardened 22MnB5 Tipo de participación: oral Congreso: IDDRG 50th Anniversary Conference: Tools and Technologies for the Processing of Ultra High Strength Steels Publicación: 50th Anniversary Conference: Tools and Technologies for the Processing of Ultra High Strength Steels, IDDRG 2010 Conference Proceedings (ISBN 978-3-85125-108-1) Lugar celebración: Graz (Austria) Fecha: 06/2010

    • Authors: D. Gutiérrez, A. Lara, D. Casellas, J.M. Prado Title: Effect of strain paths on formability evaluation of TRIP steels Conference THERMEC 2009 Publication: Advanced Materials Research, Vols 89-91 (2010) pp. 214-219 Place: Berlin (Germany) Date: 08/2009

    • Authors: L. Suarez, J. A. Benito, P.R.Calvillo, D. Casellas, Y. Houbaert, R. Petrov and J. M. Prado Title: The Influence of Deformation on Microstructure Evolution of Low Alloy TRIP Steel Conference THERMEC 2009 Publication: Materials Science Forum, Vol 638-642 (2010) pp 3531-3536 Place: Berlin (Germany) Date: 08/2009

    • Authors: M. Vilaseca, M. Cruz, J. Caro, N. Cuadrado, P. Corengia, M. Brizuela, L. Mera, A. Fernández-Vicente, G. G. Fuentes, R. Martínez, E. Almandoz. Title: High temperature tribological performance of PVD duplex coatings. Conference V Congreso Ibérico de Tribología Place: Coimbra (Portugal) Date: 06/2009

    • Authors: I. Picas, R. Hernández, D. Casellas, I. Valls Title: Cold cutting of microstructurally tailored hot formed components Conference 2nd International Conference on Hot Sheet Metal Forming of High-Performance Steel Publication: Proceedings of the 2nd International Conference on Hot Sheet Metal Forming of High-Performance steel (ISBN 978-3-937524-84-9) Place: Lulea (Sweden) Date: 06/2009

    • Authors: D. Gutierrez, A. Lara, D. Casellas, J.M. Prado Title: Strain path effects on the formability of advanced high strength steels evaluated by stretching tests Conference IDDRG 2009 International Conference Publication: Proceedings of the IDDRG 2009 International Conference (ISDN 978-0-615-29641-8) Place: Golden, Colorado (USA) Date: 06/2009

    • Authors: R. Hernandez, I. Picas, A. Llobet, D. Casellas Title: Estimation of tool performance during cold forming of AHSS Conference IDDRG 2009 International Conference Publication: Proceedings of the IDDRG 2009 International Conference (ISDN 978-0-615-29641-8) Place: Golden, Colorado (USA) Date: 06/2009

    • Authors: I. Valls, B. Casas, N. Rodriguez, M. Grané, D. Casellas Title: Incidence of tool material on attainable productivity in plastic injection molding Conference 8th International Tooling Conference Publication: Proceedings of the 8th International Tooling Conference (ISBN 3-8613-0700-6) Place: Aachen (Germany) Date: 06/2009

    • Authors: D. Casellas, I. Picas, M. Castellà, A. Goez, L. Llanes, B. Casas, I. Valls Title: Effect of carbides properties and microstructural characteristics on crack nucleation and propagation in cold forming tools Conference 8th International Tooling Conference Publication: Proceedings of the 8th International Tooling Conference (ISBN 3-8613-0700-6) Place: Aachen (Germany) Date: 06/2009

    • Authors: B. Casas, D. Casellas, I. Picas, N. Rodriguez, I. Valls Title: Improvement of wear resistance of PM tool steels through microstructural design Conference 8th International Tooling Conference Publication: Proceedings of the 8th International Tooling Conference (ISBN 3-8613-0701-4) Place: Aachen (Germany) Date: 06/2009

    • Authors: A. Goez, I. Picas, I. Valls, B. Casas, D. Casellas, L. Llanes Title: Fatigue strength of cold work tool steels: microstructure – critical flaw correlation Conference 8th International Tooling Conference Publication: Proceedings of the 8th International Tooling Conference (ISBN 3-8613-0701-4) Place: Aachen (Germany) Date: 06/2009

    • Authors: I. Picas, R. Hernandez, D. Casellas, B. casas, I. Valls Title: Mechanical performance of cold forming tools Conference 8th International Tooling Conference Publication: Proceedings of the 8th International Tooling Conference (ISBN 3-8613-0701-4) Place: Aachen (Germany) Date: 06/2009

    • Authors: A. Góez, I. Picas, Y. Torres, D. Casellas, L. Llanes Title: Comportamiento a fractura de aceros para trabajo en frio: influencia de la microestructura Conference XXVI encuentro del grupo español de fractura Publication: Texto de las comunicaciones presentadas en el XXVI encuentro del grupo español de fractura (ISSN 0213-3725) Vol 1 Place: Santander (Spain) Date: 03/2009

    • Authors: N. Cuadrado, D. Casellas, J. Caro, L. Llanes Title: Caracterización mecánica mediante la técnica de nanoindentación de partículas duras Conference XXVI encuentro del grupo español de fractura Publication: Texto de las comunicaciones presentadas en el XXVI encuentro del grupo español de fractura (ISSN 0213-3725) Vol 2 Place: Santander (Spain) Date: 03/2009

    • Authors: I. Picas, R. Hernández, D. Casellas, B. Casas, I. Valls Title: Aplicación de la mecánica de la fractura para optimizar la relación desgaste-tenacidad en herramientas de corte en frío de aceros de alta resistencia Conference XXVI encuentro del grupo español de fractura Publication: Texto de las comunicaciones presentadas en el XXVI encuentro del grupo español de fractura (ISSN 0213-3725) Vol 2 Place: Santander (Spain) Date: 03/2009

    • Authors: M.D. Riera, M. Coussirat, A. Guarmo, I. Valls, D.Casellas Title: Simulation of hot stamping processes Conference 1st International Conference on Hot Sheet Metal forming of High-Performance Steel Publication: Proceedings of the 1st International Conference on Hot Sheet Metal forming of High-Performance Steel, GRIPS' Sparkling World of Steel Vol. 1: Proceedings, No. 6. - Bad Harzburg (D): Grips Media GmbH, 2008, Place: Kassel (Germany) Date: 10/2008

    • Authors: I. Picas, R. Hernandez, D. Casellas, B. Casas, I. Valls Title: Tool performance in cutting of hot stamped steel Conference 1st International Conference on Hot Sheet Metal forming of High-Performance Steel Publication: Proceedings of the 1st International Conference on Hot Sheet Metal forming of High-Performance Steel, GRIPS' Sparkling World of Steel Vol. 1: Proceedings, No. 6. - Bad Harzburg (D): Grips Media GmbH, 2008, Place: Kassel (Germany) Date: 10/2008

    • Authors: J.M. Cabrera, A. Brigido, D. Casellas, M.D. Riera, A. Estaun, J.M. Iraneta Title: Fracture behaviour of tools in cold forming of nuts and bolts with high strength steels Conference The International Conference of Engineering Failure Analysis Place: Sitges (Spain) Date: 7/2008

    • Authors: D. Casellas, C. Abad, J.M. Cabrera, R. Morales Title: Improving of fatigue resistance of steels for spring applications Conference The International Conference of Engineering Failure Analysis Place: Sitges (Spain) Date: 7/2008

    • Authors: D. Casellas, I. Picas, J. Caro, B. Casas, I. Valls Title: Fracture of cold work tools during high strength steels forming:effects of the tool steel microstructure Conference The International Conference of Engineering Failure Analysis Place: Sitges (Spain) Date: 7/2008

    • Authors: R. Cobo, R. Hernández, J. A. Benito, D. Casellas, M. D. Riera Title: Study of the influence of the decrease of the apparent young’s modulus during unloading in the springback prediction Conference The IDDRG 2008 conference, Best in Class Stamping Publication: Proceedings of the IDDRG 2008 conference, Best in Class Stamping (ISBN 978-91-633-2948-7) Place: Oloström (Sweden) Date: 6/2008

    • Authors: D Casellas, I. Picas, A. Llobet, R. Hernandez, M.D. Riera, I. Valls, B. Casas Title: Mechanical performance of tools in cold forming of high strength steels Conference International Conference on New Developments in Advanced High-Strength Sheet Steels Publication: International Conference on New Developments in Advanced High-Strength Sheet Steels Proceedings (ISBN 978-1-886362-99-4) Place: Orlando (USA) Date: 6/2008

    • Authors: D Casellas, I. Picas, A.Goez, Y. Torres, L. Llanes, I. Valls, B. Casas Title: Microstructural effects on the fatigue resistance of cold work tool steels for shaping AHSS Conference International Conference on New Developments in Advanced High-Strength Sheet Steels Publication: International Conference on New Developments in Advanced High-Strength Sheet Steels Proceedings (ISBN 978-1-886362-99-4) Place: Orlando (USA) Date: 6/2008

    • Authors: A. Llobet, D Casellas, M.D. Riera and J.M. Prado Title: Fracture toughness characterization of advanced high strength steels by means of the essential work of fracture Publication: International Conference on New Developments in Advanced High-Strength Sheet Steels Proceedings (ISBN 978-1-886362-99-4) Place: Orlando (USA) Date: 6/2008

    • Authors: I. Picas, R. Pérez, A. Lara, J.M. Prado Title: A new methodology to determine the plastic anisotropy using optical strain measuring systems: application on AHSS sheet strips and tubes Conference: The IDDRG 2008 conference, Best in Class Stamping Publication: Proceedings of the IDDRG 2008 conference, Best in Class Stamping (ISBN 978-91-633-2948-7) Place: Olofström (Sweden) Date: 6/2008

    • Authors: J. Fornell, A. Concustell, S. Suriñach, Weihuo Li, J. Caro, N. Cuadrado, A. Gebert, M. D. Baró, J. Sort. Title: Deformation and fracture in Ti40 Zr25 Ni8 Cu9 Be18 bulk metallic glass studied by compression tests and nanoindentation Conference The Sixth Internacional Bulk Metallic Glasses Conference Place: Xi’an (CHINA)) Date: 05/2008

    • Authors: S.Molas, L. Llanes, D. Casellas, M. R. Cruz, F. Montalà, J. Caro Title: Designing Coated Maraging Steels Systems for Tools in Forming Process Conference The 35th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2008). Place: San Diego (USA) Date: 05/2008

    • Authors: M. R. Cruz, M. H. Staia, J. Caro Title: Tribological Performance of Duplex Treated Ion Nitrided and PVD Conference The 35th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2008). Place: San Diego (USA) Date: 05/2008

    • Authors: I. Valls, B. Casas, D Casellas, I. Picas, R. Hernandez Title: Innovative Tool Steel concept for the cutting of high and extremely high resistance sheet Conference Forum Stanztechnik Place: Dortmund (Germany) Date: 4/2008

    • Authors: R. Hernández, M.R. Cruz, I. Picas, M.D. Riera, D. Casellas Title: Tribological approach of forming tool performance based on finite element modelling (FEM) Conference: International Symposium on Friction, Wear and Wear Protection Place: Aachen (Germany) Date: 4/2008

    • Authors :M.R. Cruz, D. Casellas Title: Effect of carbide orientation on wear behaviour of DIN 1.2379 tool steel Conference: International Symposium on Friction, Wear and Wear Protection Place: Aachen (Germany) Date: 4/2008

    • Authors: A. Marquilles, M.R. Cruz, J. Caro, D. Casellas, J.M. Prado Title: Ensayo de micro-abrasión como herramienta para caracterización tribológica de recubrimientos duros delgados Conference: Xi Conference Nacional de Tratamientos Térmicos TRATERMAT08 Publication: Actas del Xi Conference Nacional de Tratamientos Térmicos TRATERMAT08 Place: Valencia (Spain) Date: 3/2008

    • Authors: R Hernandez, M.D. Riera, D Casellas, I. Valls, B. Casas and J.M. Prado Title: Tool steel selection for cold forming of high strength steels based on the stress distribution on tools Conference MS&T 2007 Publication: MS&T 2007: AUTOMOTIVE: Advanced High strength and other specialty steel products for the automotive industry Place: Detroit Date: 9/2007

    • Authors: R. Hernández, M.R. Cruz, D. Casellas, M.D. Riera, J,M, Prado Title: Evaluación del comportamiento a desgaste en aceros de herramienta: simulación por ordenador y verificación experimental Conference: XXIV Encuentro del Grupo Español de Fractura Publication: Anales de Mecánica de la Fractura Vol 24-II Place: Zamora (Spain) Date: 9/2006

    • Authors: .D Casellas, J. Caro, J.M. Prado and I. Valls Title: Micromechanical characterizrion of hard phases in tool steels Conference: Materials Science and Technology (MS&T) 2006 Publication: Materials Science and Technology (MS&T) 2006: FUNDAMENTALS AND CHARACTERIZATION VOL. 2 Place: Boston (USA) Date: 9/2006

    • Authors: ): .D Casellas, J. Caro, M.D. Riera, S. Molas, A. Beltran,R. Hernández and J.M. Prado Title: Aplicación de materiales en el conformado de aceros de alta resistencia Conference: IX Conference Nacional de Materiales Publication: Perspectiva de la investigación sobre materiales en España en el siglo XXI Place: Vigo (Spain) Date: 6/2006

    • Authors: D. Casellas, J. Caro and J.M. Prado Title: Caracterización mecánica de carburos de aceros de herramienta de trabajo en frío Conference: IX Conference Nacional de Materiales Publication: Perspectiva de la investigación sobre materiales en España en el siglo XXI Place: Vigo (Spain) Date: 6/2006

    • Authors: D. Casellas, J. Caro, S. Molas, A. Beltran and J.M. Prado Title: Improvement of performance of cold forming tools through microstructural tailoring Conference: IDDRG06 Publication: IDDRG06 Proceedings: Drawing the things to come Place: Porto (Portugal) Date: 6/2006

    • Authors: D. Casellas, J. Caro, J.M. Prado and I. Valls Title: Mechanical characterisation of carbides in cold work tool steels Conference: 7th Internacional Tooling Conference Publication: Tooling materials and their applications from research to market Place: Torino (Italy) Date: 5/2006

    • Authors: D. Casellas, A .Beltrán, J. Caro, S. Molas and J.M. Prado Title: Mechanical Microstructural effects on the fracture resistance of cold work tool steels Conference: 7th Internacional Tooling Conference Publication: Tooling materials and their applications from research to market Place: Torino (Italy) Date: 5/2006

    • Authors: D. Casellas, A .Beltrán, J. Caro, S. Molas and J.M. Prado Title: Comportamiento mecánico de aceros de trabajo en frío: efecto de la microestructura Conference: X Conference Nacional de Tratamientos Térmicos y de Superficie Publication: Actas del X Conference Nacional de Tratamientos Térmicos y de Superficie Place: Sevilla (Spain) Date: 10/2005

    • Authors: D. Casellas, R. Pérez and J.M. Prado Title: Efecto de la modificación de la microestructura en el comportamiento mecánico de fundición de aluminio-silicio Conference: X Conference Nacional de Tratamientos Térmicos y de Superficie Publication: Actas del X Conference Nacional de Tratamientos Térmicos y de Superficie Place: Sevilla (Spain) Date: 10/2005

    • Authors: R. Hernández, M.D. Riera, D. Casellas and J.M. Prado Title: Determinación del estado tensional en útiles de conformado de acero de alta resistencia y aplicación de aceros de herramienta Conference: X Conference Nacional de Tratamientos Térmicos y de Superficie Publication: Actas del X Conference Nacional de Tratamientos Térmicos y de Superficie Place: Sevilla (Spain) Date: 10/2005

    • Authors: J. Caro, D. Casellas, and J.M. Prado Title: Evaluation of wear resistance in PM alloys by means of microscratching testing Conference: European Powdef Metallurgy Conference 2004 Publication: Euro PM2004 Conference Proceedings Volume 4 Place: Viena (Austria) Date: 10/2004

    • Authors: Y. Torres, D. Casellas, M. Anglada and L. Llanes Title: Fracture behaviour of hardmetals: implementations of flaw configuration modelling and R-Curve concepts Conference: European Powdef Metallurgy Conference 2004 Publication: Euro PM2004 Conference Proceedings Volume 3 Place: Viena (Austria) Date: 10/2004


>> Veure publicacions anteriors


Av. de les Bases de Manresa 1 - 08242 Manresa (Barcelona) · Tel. 93 877 73 73 - Fax 93 877 73 74 · E-mail: info@ctm.com.es

Avis Legal | DISSENYWEB NED