Publicaciones de Procesos de Conformado
 
  1. Publicaciones en revistas internacionales indexadas en Web of Science del Staff:

    1. Lucia Suarez, Pablo Rodriguez-Calvillo,Yvan Houbaert and Rafael Colas, Oxidation of Ultra Low Carbon and silicon bearing steels, Corrosion Science, Vol.52, p.2044-2049 (2010), ISSN: 0010-938X.

    2. J. Calvo, I.-H. Jung, A.M. Elwazri, D. Bai, S. Yue, Influence of the chemical composition on transformation behaviour of low carbon microalloyed steels, Materials Science and Engineering A, Vol.520, Nº 1-2, p.90-96 (2009) ISSN: 0921-5093.

    3. Lucia Suarez, Yvan Houbaert, Xavier Vanden Eynde and Rafael Colas,High temperature oxidation of oxide scale, Corrosion Science, Vol.51, p.309-315 (2009), ISSN: 0010-938X.

    4. Garcia V.G., Cabrera J.M., Prado J.M., Role of Cu2O During Hot Compression of 99.9% Pure Copper, Materials Science & Engineering A, Vol.488, Nº 1-2, p. 92-101 (2008), ISSN 0921-5093.

    5. L. Suarez, Y. Houbaert, X. Vanden Eynde and R. Colas, Development of an experimental device to study high temperature oxidation, Oxidation of Metals, Vol.70, p.1-13 (2008), ISSN: 0030-770X.

    6. R. Rodriguez-Baracaldo, R. Tejedor, J.A. Benito JA, J.M. Cabrera, J.M. Prado, Microstructural evolution and mechanical response of nanocrystalline and ultrafine grained steel obtained by mechanical milling, Materials Science and Engineering A, Vol.493, p. 215-220 (2008).

    7. R. Rodriguez-Baracaldo, J. Caro, J.A. Benito, J.M. Cabrera, J.M. Prado, Strain rate sensitivity of nanocrystalline steel and ultrafin grained steel obtained by mechanical attrition, Materials Science and Engineering A, Vol.485, p.325-333 (2008)

    8. R. Tejedor, R. Rodriguez-Baracaldo, J. Caro, J.A. Benito, J.M. Cabrera, Influence of the carbon content on the strain rate sensitivity of nanocrystalline steels, Scripta Materialia, Vol.59, p. 631-634 (2008).

    9. E. Lopez-Chipres, I. Mejía, C. Maldonado, A. Bedolla-Jacuinde, M. El-Wahabi, J.M. Cabrera, Hot flow behavior of boron microalloyed steels, Materials Science and Engineering A, Vol. 480, p 49-55 (2008), ISSN: 0921-5093.

    10. I. Mejía, E. López-Chipres, C. Maldonado, A. Bedolla-Jacuinde and J.M. Cabrera, Physical modeling of the hot flow behavior of boron microalloyed steels under uniaxial hot-compression conditions, International Journal of Materials Research, Vol. 99, Nº 12, p 1336-1345 (2008), ISSN: 1862 5282.

    11. N. Lugo, N. Llorca, J.M. Cabrera and Z. Horita, Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion, Materials Science and Engineering A, Vol 477, p 366-371 (2008), ISSN: 0921-5093.

    12. G. Rivera, P. R. Calvillo, R. Boeri, Y. Houbaert and J. Sikora, Examination of the solidification macrostructure of spheroidal and flake graphite cast irons using DAAS and ESBD, Materials Characterization, p. 1342-1348, Vol. 59 (2008), ISSN 1044-5803.

    13. K.M. Mostafa, J. De Baerdemaeker, P.R. Calvillo, N. Van Caenegemb, Y. Houbaert and D. Segers, A Study of Defects in Iron Based Alloys by Positron Annihilation Techniques, Acta Physica Polonica A, Vol. 113, p. 1471-1478 (2008), ISSN 0587-4246.

    14. A. Boulaajaj, J.M. Cabrera and J.M. Prado, Effect of initial microstructure, frequency and temperature on the low cycle fatigue behaviour of the soldering alloys 96.5Sn–3.5Ag and 63Sn–37Pb, Engineering Failure Analysis, Vol. 15, p. 220–228 (2008), ISSN:0213-3725.

    15. K.M. Mostafa, J. De Baerdemaeker, P.R. Calvillo, Y. Houbaert and D. Segers, A Study of Defects in Deformed Fe-Si Alloys by Using of Positron Annihilation Techniques, Applied Surface Science, Vol. 255, p. 149-152, (2008), APSUSC 17181.

    16. A.M. Elwazri, A. Fatehi, J. Calvo, D. Bai, S. Yue, Analysis of copper effect on microstructures and mechanical properties in microalloyed steels, ISIJ International, Vol..48, Nº.1, p.107-113 (2008), ISSN: 0915-1559.

    17. J. Calvo, J.M. Cabrera, A. Rezaeian, S. Yue, Evaluation of the hot ductility of a C-Mn steel produced from scrap recycling, ISIJ International, Vol.47, Nº.10, p.1518-1526 (2007), ISSN: 0915-1559.

    18. J. Calvo, A. Rezaeian, J.M. Cabrera, S. Yue, Effect of the thermal cycle on the hot ductility and fracture mechanisms of a C-Mn steel, Engineering Failure Analysis, Vol..14, p. 374-383 (2007), ISSN: 1350-6307.

    19. R. Rodriguez-Baracaldo, J.A. Benito, E.S. Puchi-Cabrera, M.H. Staia, High temperature wear resistance of (TiAI)N PVD coating on untreated and gas nitrided AISI H13 steel with different heat treatments, Wear, p.380-389 (2007).

    20. R. Rodriguez-Baracaldo, J.A. Benito, J.M. Cabrera, J.M. Prado, Mechanical response of nanocrystalline steel obtained by mechanical attrition, Journal of Materials Science, Vol.42, p.1757-1764 (2007).

    21. E. Lopéz-Chipres, I. Mejía, C. Maldonado, A. Bedolla-Jacuinde and J. M. Cabrera, Hot ductility behavior of boron microalloyed steels, Materials Science and Engineering A, Vol. 460-461, p. 464-470 (2007), ISSN: 0921-5093.

    22. A. Forn, J.A. Picas, M.T. Baile, E. Martin,V.G. García, Microstructure and tribological properties of anodic oxide layer formed on Al-Si alloy produced by semisolid processing, Surface & Coatings Technology, Vol. 202 Nº 4-7, p.1139–1143 (2007), ISSN 0257-8972.

    23. P.R. Calvillo, T. Ros-Yáñez, D. Ruiz and Y. Houbaert, Straining Behaviour of High Si-alloys Determined by Hot Torsion Tests, Vol. 46, p. 1685-1692 (2006), ISSN 0915-1559

    24. P. R. Calvillo, T. Ros-Yáñez, D. Ruiz, R. Colás and Y. Houbaert, Plane Strain Compression of a High Silicon Steel, Materials Science and Technology, Vol. 22 p.1105-1111, (2006), DOI: 10.1179/174328406X114207.

    25. J.Calvo, J.M. Cabrera, J.M. Prado, Ductilidad en caliente y mecanismos de fractura de un acero de construcción, Revista de Metalurgia, Vol..42, Nº.1, p.11-17 (2006), ISSN: 0034-8570.

    26. A. Hernández-Expósito, J.M. Chimenos, A.I. Fernández, O. Font, X. Querol, P. Coca, F. García Peña, Ion flotation of germanium from fly ash aqueous leachates, Chemical Engineering Journal, Vol.118, p. 69–75 (2006), ISSN: 1385-8947.

    27. A. Al Omar, A. Chenaoui, R. Dkiouak, J.M. Cabrera y J.M. Prado, Aproximación al control de la microestructura de dos aceros microaleados con contenido medio de carbono en condiciones de conformado en caliente, Revista de Metalurgia, Nº 42, p 103-113 (2006), ISSN: 0034-8570.

    28. A. Thomas, M. El. Wahabi, J.M. Cabrera and J.M. Prado, High temperature deformation of Inconel 718, Journal of Materials Processing Technology, Vol. 177, p 469-472 (2006), ISSN: 0924-0136.

    29. J.M. Chimenos, A.I. Fernández, A. Hernández, L. Haurie, F. Espiell, C. Ayora, Optimization of phosphate removal in anodizing aluminium wastewater, Water Research Vol. 40, p. 13 –143 (2006), ISSN: 0043-1354.

    30. R.Perez, J.A.Benito, J.M.Prado, Study of the inelastic response of TRIP steels after plastic deformation, ISIJ International, Vol. 45, p. 1925-1933 (2005).

    31. J.M.Manero, J.A. Benito, J.Jorba, A.Roca, Change of Young's modulus of cold-deformed pure iron in a tensile test, Metallurgical and Materials Transactions A, Vol.36, p. 3317-3324 (2005).

    32. M. El Wahabi, L. Gavard, F. Montheillet, J.M. Cabrera and J.M. Prado, Effect of initial grain size on dynamic recrystallization in high purity austenitic stainless steels, Acta Materialia, Vol. 53, p.4605-4612 (2005), ISSN: 1359-6454

    33. J. Millán, A. L. Rivas, J. M. Cabrera, S. Camero y J. C. Machado, Evolución de la microestructura y de las propiedades mecánicas durante el recocido isotérmico de un acero de 0,04%C calmado al aluminio, Revista de Metalurgia, Nº 41, p 427-440 (2005), ISSN-0034-8570.

    34. S. Alcántara, C. Perron, C Merizalde, J.M. Cabrera y J.M. Prado, Obtención de materiales con comportamiento tixotrópico mediante compocasting, Revista de Metalurgia, Vol Extraordinario, p 111-115 (2005), ISSN: 0034-8570

    35. M. El Wahabi, L. Gavard, J.M. Cabrera, J.M. Prado and F. Montheillet, EBSD study of purity effects during hot working in austenitic stainless steels, Materials Science and Engineering, Vol. A393, p 83-90 (2005), ISSN: 0921-5093.

    36. J.M. Cabrera, F. Escobar and J.M. Prado, Influence of carbon content on high temperature response of plain carbon steels, Ironmaking and Steelmaking, Vol .32, Nº 4, p. 309-313 (2005), ISSN: 0301-9233.

    37. Garcia V.G., Cabrera J.M., Prado J.M., Predicting Multiple Peak Dynamic Recrystallization of Copper, Materials Science Forum, Vol. 467-470, p. 1181-1186 (2004), ISSN: 0255-5476.

    38. N. Lugo, E.S. Puchi, J.M. Cabrera y J.M. Prado, Deformación a velocidad variable de hierro ARMCO, Revista de Metalurgia, Nº 40, p 139-145, (2004), ISSN: 0034-8570.

    39. E. Flores, J.M. Cabrera and J.M. Prado, Effect of clustering of precipitates on grain growth, Metallurgical Transactions A, Vol 35A, p. 1097-1103 (2004), ISSN: 1073-5623/83.


  2. Publicaciones en otras revistas internacionales del Staff:

    1. J.A. Benito, R. Tejedor, R. Rodríguez-Baracaldo, J.M. Cabrera, J.M.Prado, Ductility of bulk nanocrystalline and ultrafine grain iron and steel, Materials Science Forum, Vol. 633-634, p 197-203 (2010), ISSN: 1662-9752.

    2. P. R. Calvillo, A. Hernandez-Exposito, A. Boulaajaj and J. M. Cabrera, Hot Deformation and Ductility Analysis of Continuous Cast C40 Steel by means of Tensile and Compression Tests, Materials Science Forum, Vol. 638-642, p.3152-3157 (2010), ISSN 0255-5476.

    3. P.R.Calvillo, L.Suarez and Y. Houbaert, Al-Si-Fe Intermetallics on Fe-Substrates During Hot-Dipping, Defect and Diffusion Forum, Vol. 297-301, p. 1042-1047 (2010), ISSN: 1012-0386.

    4. L. Suarez, J. A. Benito, P.R.Calvillo, D. Casellas, Y. Houbaert, R. Petrov and J.M. Prado, The influence of deformation on microstructure evolution of low alloy TRIP steel, Materials Science Forum, Vol. 638-642 ,p. 3531-3536, (2010), ISSN: 0255-5476.

    5. L. Suarez, D. Warichet and Y. Houbaert, Galvanized Coatings Produced in a Hot Dip Simulator (HDS), Defect and Diffusion Forum, Vol. 297-301, p. 1048-1052, (2010), ISSN: 1012-0386.

    6. G. Varela-Castro, J.M. Cabrera and J. M. Prado, Influence of manganese on the hot working behaviour of construction steels, Journal of Advanced Materials Research Vol. 89-91, p 580-585 (2010), ISSN: 1662-8985.

    7. G. Varela-Castro, J. Calvo and J. M. Cabrera, Analysis of hot tensile and compression curves to assess the hot ductility of C-Mn steels, Materials Science Forum, Vol. 638-642, p. 3158-3163 (2010), ISSN: 1662-9752.

    8. P. R. Calvillo, J. Schneider and Y. Houbaert, Characterisation by EBSD of Cold Rolled High-Silicon Steel, Defect and Diffusion Forum, Vol. 283-286, p.413-418 (2009), ISSN: 1012-0386.

    9. L. Suarez, P.R. Calvillo, R. Colás and Y. Houbaert, Microstructure and Phase Identification of Tertiary Oxide Scale on Steel by EBSD, Defect and Diffusion Forum, Vol. 283-286, p. 419-424 (2009), ISSN: 1012-0386.

    10. P. R. Calvillo, R. Rouco and Y. Houbaert, Growth Kinetics of Al-Si-Fe Intermetallics during Hot Dipping of Steel, Defect and Diffusion Forum, Vol. 273-276 (2008), p. 58-62, ISSN 1012-0386.

    11. P. R. Calvillo, P. Bernardez and Y. Houbaert, Production of Electrical Steel by Hot Dipping in Aluminium, Defect and Diffusion Forum, Vol. 273-276, p. 63-68 (2008), ISSN 1012-0386.

    12. P. R. Calvillo, N. Salazar, J. Schneider and Y. Houbaert, Microstructure Characterisation by EBSD of Annealing Bands in High-Silicon Steel , Defect and Diffusion Forum, Vol. 273-276 , p. 69-74, (2008), ISSN 1012-0386.

    13. L. Suarez, J. Schnëider and Y. Houbaert, High-Temperature oxidation of Fe-Si alloys in the temperature range 900-1250°C, Defect and Diffusion Forum, Vol. 273-276, p. 661-666-424 (2008), ISSN: 1012-0386.

    14. L. Suarez, J. Schnëider, Y. Houbaert, Effect of silicon on high-temperature oxidation of steel during hot rolling, Defect and Diffusion Forum, Vol. 273-276, p. 655-660 (2008) , ISSN: 1012-0386.

    15. L. Suarez, F. Leysen, C. Masquelier, D. Warichet, and Y. Houbaert, Effects of Mg Additions on Surface Morphology and Corrosion Resistance of Hot-Dipped Zn Coatings, Defect and Diffusion Forum, Vol. 273-276, p. 300-305 (2008), ISSN: 1012-0386.

    16. L. Suarez, R. Petrov, L. Kestens, M. Lamberigts and Y. Houbaert, Texture evolution of Tertiary Oxide Scale during Steel Plate Finishing Hot Rolling Simulation Tests, Materials Science Forum, Vol. 550, p. 557-562 (2008), ISSN: 0255-5476.

    17. R. Tejedor, R. Rodríguez-Baracaldo, J.A. Benito, J.M. Cabrera and J.M. Prado, Plastic deformation of a nanostructured and ultra-fine grained Fe-1%Cr with a bimodal grain size distribution,“International Journal of Material Forming (2008),ISSN: 1960-6206 (Print) 1960-6214 (Online).

    18. R. Tejedor, R. Rodríguez Baracaldo, J.A. Benito, J.M. Cabrera y J.M. Prado, Análisis de la fractura de un acero de bajo contenido en carbono con grano nanométrico y ultrafino obtenido por molienda mecánica, Anales de mecánica de la fractura, 25, vol I, p 157-162 (2008), ISSN: 0213-3725.

    19. Rodriguez-Baracaldo R, Tejedor, Benito JA, Cabrera JM y Prado JM, Study of the plastic deformation in nanocrystalline and ultrafine iron and Carbon steels, Materials Science Forum, Vol. 584-586, p. 617-622 (2008).

    20. N. Lugo, J.M. Cabrera, N. Llorca, C.J. Luis, R. Luri, J. León and I. Puertas, Grain refinement of pure copper by ECAP, “Materials Science Forum, Vol. 584-586, p 393-398 (2008), ISSN: 0255-5476.

    21. Pablo R. Calvillo and Yvan Houbaert, Texture Evolution of High Temperature Plane Strain Compression of High Silicon Steels, Materials Science Forum, Vol, 553, p. 15-20 (2007), ISSN 0255-5476.

    22. Pablo R. Calvillo, Rafael Colás and Yvan Houbaert, Hot Deformation Analysis of a 2 wt.-% Si Electrical Steel by means of Torsion Tests, Advance Materials Research, Vol. 15-17 , p. 708-713 (2007), ISSN: 1022-6680.

    23. Pablo Rodriguez Calvillo, Roumen Petrov, Yvan Houbaert, Leo Kestens, A Study of Texture Evolution during Deformation and Annealing in Fe 3 wt.-% Si by Orientation Contrast Microscopy, Materials Science Forum, Vol. 550, p. 539-544 (2007), ISSN 0255-5476.

    24. V.G. Garcia, J.M. Cabrera, J.M. Prado,, A Model for Multi Peak Dynamic Recrystallization in Copper, Materials Science Forum, Vol. 550, p. 565-570 (2007), ISSN: 0255-5476

    25. V.G. Garcia, J.M. Cabrera, J.M. Prado, Effects of Precipitation during Dynamic Recrystallization of Copper with Different Oxygen Levels, Materials Science Forum, Vol. 558-559, p. 511-516 (2007), ISSN: 0255-5476.

    26. V.G. García, J.M. Cabrera and J.M. Prado, A model for multi peak dynamic recrystallization in copper, Materials Science Forum, Vol 550, p 565-570 (2007), ISSN: 0255-5476.

    27. L. Suarez, G. Bourdon, X. Vanden Eynde, M. Lamberigts and Y. Houbaert, Tertiary Scale Behaviour during Finishing Hot Rolling of Steel Flat Products, Advanced Materials Research, Vol. 15-17, p. 732-737 (2007), ISSN: 1022-6680

    28. R. Rodríguez-Baracaldo, J.A. Benito and J.M. Cabrera, Procesos de severa deformación plástica para obtener materiales de grano nanométricos y ultrafinos, Ingeniería e Investigación, Vol. 27, Nº1, 101-105 (2007), ISSN 0120-5609.

    29. C. Merizalde, J.M. Cabrera and J.M. Prado, Thixotropic behaviour of a Cu – eutectic Sn-Pb slurry, Materials Science Forum, Vol. 560, p. 17-22 (2007), ISSN: 0255-5476.

    30. Yvan Houbaert, Tanya Ros-Yáñez, Pablo R. Calvillo, José Barros and Leo Kestens, On the effect of texture in experimental grades of high-silicon electrical steel, Materials Science Forum, Vol. 539-543, p. 3341-3346 (2007), ISSN 0255-5476.

    31. Tanya Ros-Yáñez, Pablo R. Calvillo, Rafael Colás and Yvan Houbaert, Workability and straining behaviour of high silicon steel (3,0 – 6,3 wt.-% Si) by hot torsion and RT compression tests, Materials Science Forum, Vol. 539-543, p. 4422-4427, (2007), ISSN 0255-5476

    32. A. Boulaajaj, J.M. Cabrera y J.M. Prado, Efecto de la Microestructura, Frecuencia y Temperatura en el Comportamiento a Fatiga Oligocíclica de las Aleaciones Soldantes 96.5Sn-3.5Ag y 63Sn-37Pb, Anales de Mecánica de la Fractura, Vol. 23, p. 647-652 (2006), ISSN: 0213-3725.

    33. P.Rodriguez Calvillo, A.C.C. Reis, L. Kestens and Y. Houbaert, Grain Refinement by High Temperature Plane-strain Compression of Fe-2%Si Steel, Materials Science Forum, Vol. 503-504, p.977-982 (2006), ISSN 0255-5476.

    34. J. Calvo, J.M. Cabrera, A. Rezaeian, S.Yue, Effect of the test conditions on the hot ductility and fracture mechanisms of a C-Mn steel, Anales de Mecánica de la Fractura, Vol.23, p. 409-414 (2006), ISSN: 0213-3725.

    35. L. Suarez, R. Coto, X. Vanden Eynde, M. Lamberigts and Y. Houbaert, High temperature oxidation of Ultra-Low-Carbon Steel , Defect and Diffusion Forum, Vol. 258-260, p. 158-163 (2006), ISSN: 1012-0386.

    36. J. Lluma, J. A. Benito. A.Roca, J.M. Cabrera and J.M.Prado, Study of the nanometric grain size distribution in iron compacts obtained by mechanical milling, Materials Science Forum, Vol. 503-504, p. 1007-1015 (2006).

    37. I.Mejía, C.Maldonado, J.A.Benito, J.Jorba, A.Roca, Determination of the work hardening exponent by the Hollomon and differential Crussard-Jaoul analyses of cold ferrite-pearlite steels, Materials Science Forum, p. 37-42 (2006).

    38. J.C. Millán, A.L. Rivas, J.M. Cabrera, S. Camero and L. Kestens, Microestructure evolution of a commercial 0.04%C steel during batch annealing, Materials Science Forum, Vol. 509, p 17-24 (2006), ISSN: 0255-5476.

    39. A.Forn, J.Picas, M.T.Baile, S.Menargues, V.G.García, Anodic oxide layer formation on A357 aluminium alloy produced by Thixocasting, S2P, Solid State Phenomena Vol. 116-117 p. 80-83(2006), ISSN: 1012-0394.

    40. J. Calvo, A. Rezaeian, J.M. Cabrera, S. Yue, Effect of the thermal cycle on the hot ductility and fracture mechanisms of a C-Mn steel, Anales de Mecánica de la Fractura, Vol.22, p. 184-189 (2005), ISSN: 0213-3725.

    41. J. Calvo, J. M. Cabrera y J. M. Prado, Ductilidad en caliente de un acero de medio carbono, Revista de la Faculta de Ingeniería de la U.C.V., Vol 20, Nº1, p 33-38 (2005). ISSN: 0798-4065.

    42. A. Villuendas, J. Lluma, J.A.Benito, A.Roca, J.M. Cabrera, J.M.Prado, Estudio de la fractura de compactos de hierro con grano nanométrico obtenidos por molienda mecánica, Anales de la mecánica de la fractura, Vol.22, p. 514-518 (2005).

    43. J. Millán, A.L. Rivas, J.M: Cabrera, S. Camero y J. Machado, Proceso de recristalización durante el recocido de un acero 0.04%C calmado al aluminio, Revista de la Faculta de Ingeniería de la U.C.V., Vol. 20, Nº1, p 17-31, (2005), ISSN: 0798-4065.

    44. A. Al Omar, A. Chenaoui, R. Dkiouak, J.M Cabrera and J.M. Prado, Microstructural evolution of two medium carbon microalloyed steels during hot forging process, Materials Science Forum, Vol. 500-501, p. 155-162 (2005), ISSN: 0255-5476.

    45. E. Hurtado, J. Calvo, J.M. Cabrera, J.M. Prado, R.D. Morales, Mechanical evaluation of the hot temperature ductility of a low carbon microalloyed steel by tensile and compression tests, Steel Grips, Vol.2, p. 212-216 (2004) ISSN: 1611-4442.


  3. Formación del staff:

    1. Ahmed Boulaajaj, Tesis Doctoral: Comportamiento a Deformación Plástica Estática y Cíclica de las Aleaciones Soldantes 63Sn-37Pb y 96,5Sn-3,5Ag, Director de tesis: J.M. Cabrera y J.M. Prado (2008), Ciència de los Materiales e Ingeniería Metalúrgica, UPC, Barcelona.

    2. Pablo Rodríguez Calvillo, Tesis Doctoral: Deformation Analysis of High Si-Steel during Torsion and Compression Testing, Director de tesis: Yvan Houbaert(2007), Departamento de Ciencia de los Materiales e Ingeniería, Universidad de Gante, Bélgica, ISBN 978-90-8578-175-2.

    3. Lucia Suarez, Tesis Doctoral: Growth and deformation behaviour of oxide scale on steel, Director de tesis: Yvan Houbaert (2007), Departamento de Ciencia de los Materiales e Ingeniería, Universidad de Gante, Bélgica, ISBN 978-90-8578-174.

    4. J. Calvo, Tesis Doctoral: Efecto de los elementos residuales e impurezas en la ductilidad y mecanismos de fragilización en caliente de un acero de construcción 0.23C 0.9Mn-0.13Si, Director de tesis: J.M. Cabrera, Ciència de los Materiales e Ingeniería Metalúrgica, UPC, Barcelona (2006).

    5. V.G. García Fernández, Tesis Doctoral: Constitutive Relations to Model the Hot Flow of Commercial Purity Copper, Directores de tesis: J.M. Cabrera y J.M. Prado, Universitat Politècnica de Catalunya Barcelona (2004), ISBN: 84-689-0578-X.

    6. J.A. Benito Páramo, Tesis Doctoral: Variación del módulo de Young del hierro Armco deformado en frío por laminación y estirado, Directores de tesis: A.Roca y J. Jorba, Universitat de Barcelona (2001).

    7. J.M. Cabrera Marrero, Tesis Doctoral: Caracterización mecánico-metalúrgica de la conformación en caliente del acero microaleado de medio carbono 38MnSiVS5, Director de tesis: J.M. Prado, Ciència de los Materiales e Ingeniería Metalúrgica Universitat Politècnica de Catalunya Barcelona (1995).


  4. Tesis doctorales desarrolladas en el grupo:

    1. R.Rodríguez Baracaldo, Tesis Doctoral: Obtención y caracterización de aceros con grano nanométrico y ultrafino fabricados mediante molienda mecánica. Directores de tesis: J.M. Cabrera y J. A. Benito, Ciència de los Materiales e Ingeniería Metalúrgica, UPC, Barcelona (2008).

    2. E. López Chiprés, Tesis Doctoral: Estudio del comportamiento de la fluencia en caliente de aceros microaleados al boro. Directores de tesis: J.M. Cabrera e I. Mejía, Ciència de los Materiales e Ingeniería Metalúrgica, UPC, Barcelona (2008).

    3. C. Merizalde, Tesis Doctoral: Caracterización y desarrollo de un material tixotrópico base SnPb mediante compocasting. Directores de tesis: J.M. Cabrera y J. M. Prado, Ciència de los Materiales e Ingeniería Metalúrgica, UPC, Barcelona (2008).


  5. Participaciones en congresos:

    1. P.R Calvillo, R. Bonet, J. Caro and J.M. Cabrera, Diffusion Annealing of Al/Si PVD Coatings on Iron Substrates, 6th International Conference of Diffusion in Solids and Liquids DSL2010,Paris, Francia, 5-7 Julio 2010, participación oral y co-chairman.

    2. P.R. Calvillo, L. Suarez, JM Cabrera and R. Petrov, Microstructure Evolution under Static Straining of Low Alloyed TRIP Steels evaluated by EBSD, MS&T’10 International Conference, Austenite Formation and Decomposition IV Symposium, 17-21 Octubre de 2010, Houston, EEUU, participación con poster

    3. L. Suarez and J.M. Cabrera, Continuous hot dip galvanizing on steel sheets , 6th International Conference of Diffusion in Solids and Liquids DSL2010,Paris, Francia, 5-7 Julio 2010, participación oral y co-chairman.

    4. P.R.Calvillo, L.Suarez and Y. Houbaert, Al-Si-Fe-intermetallics on Fe-substrates during hot-dipping, 5th International Conference of Diffusion in Solids and Liquids DSL2009, Roma, Italia, 24-26 Junio 2009, participación oral.

    5. P.R. Calvillo, A. Hernández, A. Boulaajaj and J.M. Cabrera, Hot deformation and ductility analysis of continous cast C40 steel by means of tensile and compression tests, International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2009, Berlín, 25-29 Agosto, 2009, participación oral y escrita.

    6. L. Suarez, J.A.Benito, P.R.Calvillo, D.Casellas, Y.Houbaert, R.Petrov and J.M.Prado, The influence of deformation on microstructure evolution of low alloy TRIP steel, International Conference on Processing and Manufacturing of Advanced Materials THERMEC 2009, 25-29 Agosto 2009, Berlín, Alemania, participación oral.

    7. L. Suarez, D. Warichet and Y. Houbaert, Studies of galvanized coatings produced in a hot dip simulator (HDS), 5th International Conference of Diffusion in Solids and Liquids DSL2009, Roma, Italia, 24-26 Junio 2009, participación oral y co-chairman.

    8. M. Pla, R.Cobo, R.Hernandez and J.A. Benito, Analysis of the decrease of the apparent Young’s modulus of advanced high strength steels and its effect in bending simulations, 2009 Conference of the International Deep Drawing Research Group, junio 2009, Colorado (EE.UU), Participación oral.

    9. G. Varela-Castro, J.M. Cabrera and J. M. Prado, Influence of manganese on the hot working behaviour of construction steels, International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2009, Berlín, 25-29 Agosto, 2009, presentacion escrita y poster.

    10. G. Varela-Castro, J. Calvo and J. M. Cabrera, Analysis of hot tensile and compression curves to assess the hot ductility of C-Mn steels, International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2009, Berlín, 25-29 Agosto, 2009, presentacion escrita y poster.

    11. P. Romero, N. Otero, J. Arias, J.M. Cabrera, D. Masegue, Metallurgical issues and work hardening reduction in laser assisted conical spin forming, The 5th International Congress on Laser Advanced Materials Processing LAMP 2009, Kobe, Japón, 29 junio - 2 julio 2009

    12. A.V. Lara, V. Páramo, M.P. Guerrero, R. Colás, J.M. Cabrera and M. De la Garza, Effect of recrystallization of a Fe-Ni Superalloy during hot compression, XVIII International Materials Research Congress, Cancún 17-21 Agosto 2009, participiación con poster.

    13. I. Mejía, S. González-Sala and J.M. Cabrera, Hot deformation behavior of low carbon advanced high strength steel (AHSS) microalloyed with boron, XVIII International Materials Research Congress, Cancún 17-21 Agosto 2009, Conferencia invitada. Comunicación oral y escrita. Ponente.

    14. J. Andrade, G. Castro, J.L. Arias, V.G. García, A. Gironés, B. Casas, I. Valls, A. Goez, L. Llanes, Welding materials for repairing highly mechanically demanding tools, TOOL 09, Proceedings of the 8th International Tooling Conference (Aachen), pp.265-275, ISBN: 3-8613-0700-6.

    15. J.M. Cabrera, A. Brigido, M.D. Riera, D. Casellas, A. Estaun, J.M. Irañeta, A. Martinez, Fracture behavior of tools in cold forming of nuts and bolts with high strength steels, III International Conference on Engineering Failure Analysis, ICEFA-III, Sitges, 13-16 July 2008, Participacion con Poster

    16. P. Rodríguez-Calvillo, J.M. Cabrera, Y. Houbaert, Hot deformation analysis of high Si-steels by means of torsion test, 3rd International Conference on Thermomechanical Processing of Steels, 10-12 Septiembre 2008, Padua, Presentacion escrita y oral.

    17. Pablo Rodriguez Calvillo, Jurgen Schneider and Yvan Houbaert, Characterisation by EBSD of Cold Rolled High-Silicon Steel, 4th International Conference of Diffusion in Solids and Liquids, Barcelona, España, 9-11 Julio 2008, participación oral.

    18. P. R. Calvillo, J. Schneider and Y. Houbaert, Characterisation by EBSD of cold rolled high-silicon steel, New Developments on Metallurgy and Applications of High Strength Steels, Buenos Aires, Argentina, 26-28th May 2008, participación poster.

    19. P. R. Calvillo, L. Suarez and Y. Houbaert, Solidification and Diffusion Al-Si-Fe Products during Hot Dipping of Steel, 4th International Conference of Diffusion in Solids and Liquids DSL2008, Barcelona, España, 9-11 Julio 2008, participación con poster.

    20. Garcia V.G., Cabrera J.M., Prado J.M., Influencia del oxígeno durante el procesado termomecánico del cobre 99.9% puro, Tratermat 2008 (Valencia, España), Editores: Amigo V., Salvador M. D., pp.145-152, ISBN 978-84-8363-231-4.

    21. L. Suarez, X. Vanden Eynde, M. Lamberigts and Y. Houbaert, Influence of temperature on deformation behaviour of oxide scale during finishing hot rolling, 3rd International Conference on Thermomechanical Processing of Steels, Padua, Italia, 10-12 Septiembre 2008, participación oral.

    22. L. Suarez, C. Masquelier, D. Warichet and Y. Houbaert, Studies of galvanized coatings produced in a hot dip simulator, 4th International Conference of Diffusion in Solids and Liquids DSL2008, Barcelona, España, 9-11 Julio 2008, participación con poster.

    23. L. Suarez, P. R. Calvillo, and Y. Houbaert, Microstructure and Phase Identification of Tertiary Oxide Scale on Steel by EBSD, 4th International Conference of Diffusion in Solids and Liquids DSL2008, Barcelona, España, 9-11 Julio 2008, participación oral.

    24. L. Suarez, P. R. Calvillo and Y. Houbaert, Characterisation of FeSi oxides by EBSD, New Developments on Metallurgy and Applications of High Strength Steels, Buenos Aires, Argentina, 26-28 Mayo 2008, participación con poster.

    25. R. Tejedor, R. Rodríguez-Baracaldo, J.A. Benito, J.M. Cabrera and J.M. Prado, Plastic deformation of a nanostructured and ultra-fine grained Fe-1%Cr with a bimodal grain size distribution, ESAFORM 2008, Lyon, Abril , Presentacion escrita y oral.

    26. R. Tejedor, R. Rodríguez-Baracaldo, J. A. Benito, J. M. Cabrera, J. M. Prado, Mechanical properties of nanocrystalline and ultrafine grained stel obtained by mechanical milling, Nanospain 2008, Braga 14-18 Abril, Poster.

    27. R. Cobo, R. Hernandez, J.A. Benito, D. Casellas and M.D. Riera, Study of the influence of the decrease of the apparent Young’s modulus during unloading in the springback prediction, 2008 Conference of the International Deep Drawing Research Group, junio 2008, Olofstrom (Suecia). Participación con poster.

    28. D.Casellas, C. Abad, J.M. Cabrera, R.D. Morales, Improving fatigue resistance of steel for springs applications, III International Conference on Engineering Failure Analysis, ICEFA-III, Sitges, 13-16 July 2008, Participacion con Poster

    29. G. Varela-Castro, J.M. Cabrera, J.M. Prado, Influence of C, Mn and Si on the high temperature behaviour of construction steels, 3rd International Conference on Thermomechanical Processing of Steels, 10-12 Septiembre 2008, Padua, Presentacion escrita y oral.

    30. N. Lugo, N. Llorca, J.M. Cabrera, Pure copper deformed by equal channe angular pressing (ECAP), Nanospain 2008, Braga 14-18 Abril, Poster.

    31. N. Lugo, N. Llorca, J.J. Suñol and J. M. Cabrera, Thermal Stability of Ultrafine Grains Size of Pure Copper Obtained by Equal-Channel Angular Pressing,TMS Simposium 2008, 9-13 Marzo 2008, New Orleans, Lousiana, USA, Comunicación escrita y poster.

    32. J.M. Cabrera, Modelización física de la deformación en caliente de materiales metálicos, IV Congreso Internacional de Ingeniería Física, Universidad Autónoma de México, México DF, 15-19 Octubre 2007, Conferencia plenaria. Presentación oral. Ponente.

    33. J.M. Cabrera y J.M. Prado, Simulación de la fluencia en caliente de acero mediante el uso de ecuaciones constitutivas, IV Congreso Internacional de Materiales, Universidad Tecnológica de Pereira, Pereira, Colombia, 10-14 Septiembre 2007, Conferencia plenaria, Presentación oral. Ponente.

    34. J.M. Cabrera y R.Rodríguez-Baracaldo,Obtención de materiales metálicos de tamaño de grano ultrafino, IV Congreso Internacional de Materiales, Universidad Tecnológica de Pereira, Pereira, Colombia, 10-14 Septiembre 2007, Conferencia plenaria, Presentación oral. Ponente.

    35. P. R. Calvillo, N. Salazar, J. Schneider and Y. Houbaert, Microstructure Characterisation by EBSD of Annealing Bands in High-Silicon Steel, 3rd International Conference of Diffusion in Solids and Liquids, Algarve, Portugal, 4-6th July 2007, participación oral

    36. P. R. Calvillo, R. Rouco and Y. Houbaert, Growth Kinetics of Al-Si-Fe Intermetallics during Hot Dipping of Steel, 3rd International Conference of Diffusion in Solids and Liquids, Algarve, Portugal, 4-6th July 2007, participación poster

    37. Pablo R. Calvillo, N. Lasa Garcia and Yvan Houbaert, High Temperature Straining Behaviour of High FeSi Electrical Steel by Torsion Tests, 10th Esaform Conference on Material Forming, Zaragoza, Spain, 18-20th April 2007, participación oral

    38. P. R. Calvillo, P. Bernardez and Y. Houbaert, Production of Electrical Steel by Hot Dipping in Aluminium, 3rd International Conference of Diffusion in Solids and Liquids, Algarve, Portugal, 4-6th July 2007, participación oralJ.

    39. Calvo, J. M. Cabrera, A. Rezaeian, S. Yue, Embrittlement mechanisms at high temperatures for a C-Mn steel with high residuals contents, Materials Science and Technology Conference MS&T ‘07, Detroit, Michigan, 16 – 20 September 2007, Presentación oral y escrita.

    40. Garcia V.G., Cabrera J.M., Prado J.M., Effects of Precipitation during Dynamic Recrystallization of Copper with Different Oxygen Levels, ReX & GG 3, Materials Science Forum, Vols. 558-559 (2007), ISSN: 0255-5476, pp. 511-516.

    41. Garcia V.G., Cabrera J.M., Prado J.M., A Model for Multi Peak Dynamic Recrystallization in Copper, F.J. Humphreys Symposium, Materials Science Forum, Vols. 550, (2007), pp. 565-570, ISSN: 0255-5476, ISBN: 978-0-87849-434-7.

    42. L. Suarez, C. Masquelier, D. Warichet, and Y. Houbaert, Influence of Mg Additions on Zn-5%Al Hot Dipping, 7thInternational Conference on Zinc and Zinc Alloy Coated Steel Sheet, GALVATECH2007, Osaka, Japón, Noviembre 2007, participación oral.

    43. L. Suarez, F. Leysen, C. Masquelier, D. Warichet, and Y. Houbaert Effects of Mg Additions on Surface Morphology and Corrosion Resistance of Hot-Dipped Zn Coatings, 3rd International Conference of Diffusion in Solids and Liquids DSL2007, Algarve, Portugal, 4-6 Julio 2007, participación con poster.

    44. L. Suarez, J. Schnëider, Y. Houbaert, Effect of silicon on high-temperature oxidation of steel during hot rolling, 3rd International Conference of Diffusion in Solids and Liquids DSL2007, Algarve, Portugal, 4-6 Julio 2007, participación oral.

    45. L. Suarez, J. Schnëider, Y. Houbaert, High-Temperature oxidation of Fe-Si alloys in the temperature range 900-1250°C, 3rd International Conference of Diffusion in Solids and Liquids DSL2007, Algarve, Portugal, 4-6 Julio 2007, participación con poster.

    46. L. Suarez, X. Vanden Eynde, M. Lamberigts and Y. Houbaert, Temperature evolution during plane strain compression of tertiary oxide scale on steel, 10th Esaform Conference on Material Forming ESAFORM 2007, Zaragoza, España, Abril 2007, participación oral.

    47. R. Rodriguez Baracaldo, R. Tejedor, J.A. Benito, J.M. Cabrera and J.M. Prado, Mechanical properties of nanostructures and ultrafine grained steel, International Powder Metallurgy Congress and Exhibition, PM2007, 15-17 Octubre 2007, Toulouse, Francia, Presentación oral y escrita.

    48. R. Rodríguez-Baracaldo, J.A. Benito, J.M. Cabrera, J.M. Prado, Plastic deformation on nanocrystalline and ultrafine grained iron and steel obtained by mechanical milling, International Symposium on Plasticity and its Current Applications, 2-6 Junio, Alaska 2007, Presentación oral.

    49. R. Tejedor, R. Rodríguez-Baracaldo, J. A. Benito, J. M. Cabrera, J. M. Prado, Deformación plástica de hierro y acero con tamaño de grano nanocristalino y ultrafino, XII Congreso Internacional de Energía y Recursos Minerales, Oviedo, 7 a 11 de Octubre de 2007, Comunicación escrita. Presentación oral.

    50. R. Tejedor, R. Rodríguez-Baracaldo, J.A. Benito, J.M. Cabrera, J.M. Prado, Consolidation and characterization of nanostructured and ultrafine grained steel powder, European School of Materials Science and Engineering, Fourth Research Conference, Barcelona 7-8 Junio, 2007, Comunicación escrita y poster.

    51. R. Rodríguez-Baracaldo R. Tejedor, J.A. Benito, J.M. Cabrera and J.M. Prado, Mechanical response of nanocrystalline and ultrafine grained steel obtained by mechanical milling, TMS Simposium 2007, Orlando, USA, Febrero 2007, Presentación oral y escrita.

    52. E. López-Chipres, I. Mejía, C. Maldonado, A. Bedolla-Jacuinde, J.M. Cabrera, Ductilidad y tipo de fractura en caliente de aceros microaleados al boro, Materia 2007, Morelia, 7-12 Octubre 2007, Presentación oral.

    53. N Llorca, N, Lugo, J. M. Cabrera, Z. Horita, D. Patiño, Pure copper deformed severely by equal - channel angular pressing (ECAP)”, International Symposium on Plasticity and its Current Applications, 2-6 Junio, Alaska 2007, Presentación oral.

    54. Khaled. M. Mostafa, J. De Baerdemaeker, Pablo R. Calvillo, Y. Houbaert, D. Segers, A study of defects in deformed FeSi alloys by using of positron annihilation techniques, 11th International Workshop on Slow Positron Beam Techniques for Solids and Surfaces, Orléans, France, 9-13th July 2007, participacion poster

    55. R. Rodríguez-Baracaldo, J.A. Benito, J.M. Cabrera, J.M. Prado, Mechanical behaviour of nanostructured and ultrafine grained pure copper, European School of Materials Science and Engineering, Fourth Research Conference, Barcelona 7-8 Junio, 2007, Comunicación escrita y poster.

    56. C. Merizalde, J.M Cabrera, J.M. Prado, Kinetic analysis of the IMC formed between a molten eutectic SnPb alloy and solid Cu particles, European School of Materials Science and Engineering, Fourth Research Conference, Barcelona 7-8 Junio, 2007, Comunicación escrita y poster.

    57. N. Lugo, J.M. Cabrera, N. Llorca, Equal-channel angular pressing (ECAP) a promising technique for the production of bulk materials with ultrafine grains, European School of Materials Science and Engineering, Fourth Research Conference, Barcelona 7-8 Junio, 2007, Presentacion oral y escrita.

    58. C. Merizalde, J.M Cabrera and J.M. Prado, Influence of IMC in the semisolid behaviour of an eutectic Sn-Pb/Cu slurry, ESAFORM 2007, 18-20 Abril, Zaragoza 2007, Presentacion oral y escrita.

    59. J.M. Cabrera, I. Mejía, A. Bedolla and J.M. Prado, Influence of boron additions on the hot flow behaviour of plain carbon steels, Thermec 2006, Internacional Conference on Processing & Manufacturing of Advanced Materials, Thermec 2006, 4-8 Julio 2006, Vancouver, Presentación oral. Ponente

    60. J.M. Cabrera, De la tiza al computador. Comentarios sobre la metodología docente en materiales desde el punto de vista del profesor y del alumno, V Taller Iberoamericano sobre Educación en Ciencia e Ingeniería de Materiales, 19-21 Abril 2006, Huerta Grande, Argentina, Conferencia invitada. Comunicación oral y escrita

    61. Pablo Rodriguez Calvillo, Roumen Petrov, Yvan Houbaert, Leo Kestens, A Study of Texture Evolution during Deformation and Annealing in Fe 3 wt.-% Si by Orientation Contrast Microscopy, International Symposium held to coincide with the retirement of Professor John Humphreys, Manchester, UK, 5–7th September 2006, participación poster

    62. Pablo R. Calvillo and Yvan Houbaert, Texture Evolution of High Temperature Plane Strain Compression of High Silicon Steels, 2nd International Conference of Diffusion in Solids and Liquids, Aveiro, Portugal, 26-28th July 2006, participación oral

    63. Pablo R. Calvillo, Rafael Colás and Yvan Houbaert, Hot Deformation Analysis of a 2 wt.-% Si Electrical Steel by means of Torsion Tests, International Conference on Processing and Manufacturing of Advanced Materials THERMEC 2006, Vancouver, Canada, 4-8th July 2006, participación poster

    64. J. Calvo, J.M. Cabrera, A. Rezaeian, S. Yue, Effect of the reheating temperature on the fracture mechanisms of a C-Mn steel with high residual elements, International Conference on Engineering Failure Analysis ICEFA – II, Toronto 12-15 Septiembre 2006, Poster y comunicacion escrita.

    65. García V.G., Baile M.T., Picas J., Forn A., Modelos de Comportamiento Plásticos Aplicados a la Aleación A357, IX Congreso Nacional de Materiales, Vigo (2006) Vol. II, pp. 819-822, ISBN 84-8158-323-5.

    66. L. Suarez, R. Petrov, L. Kestens, M. Lamberigts and Y. Houbaert, Texture evolution of Tertiary Oxide Scale during Steel Plate Finishing Hot Rolling Simulation Tests, International Symposium held to coincide with the retirement of Professor John Humphreys, Manchester, UK, 5–7 Septiembre 2006, participación con poster

    67. L. Suarez, R. Coto, X. Vanden Eynde, M. Lamberigts and Y. Houbaert, High-Temperature oxidation of Ultra-Low-Carbon Steel , 2nd International Conference of Diffusion in Solids and Liquids DSL2006, Aveiro, Portugal, Julio 2006, participación con poster

    68. L. Suarez, G. Bourdon, X. Vanden Eynde, M. Lamberigts and Y. Houbaert, Tertiary Scale Behaviour during Finishing Hot Rolling of Steel Flat Products, THERMEC 2006, Vancouver, Canadá, 4-8 Julio 2006, participación con poster.

    69. R. Rodríguez-Baracaldo, J.A. Benito, J.M. Cabrera and J.M. Prado, Consolidation of nanocrystalline iron and copper by warm static pressing, Euro PM2006, Gante, 23-25 Octubre 2006, Presentacion oral y escrita

    70. R. Rodríguez-Baracaldo, J.A. Benito, J. Caro and J.M. Cabrera, Strain rate sensitivity of iron bulk specimens obtained by mechanical attrition, Ultrafine grained materials, UFG-2006, Kloster Irsee, Germany, 25-27 Septiembre 2006,Poster. Premio al mejor poster.

    71. N. Lugo, J.M. Cabrera, N. Llorca, Z. Horita, Study of pure copper deformed severely by ECAP and HPT techniques, Ultrafine grained materials, UFG-2006, Kloster Irsee, Germany, 25-27 Septiembre 2006. Poster

    72. A. Thomas, M. El Wahabi, J.M. Cabrera and J.M. Prado, High temperature deformation of Inconel 718, Internacional Conference on Metal Forming 2006, The University of Birmingham, 11-13 Septiembre 2006, Presentación oral. Ponente.

    73. C. Merizalde, J.M. Cabrera and J.M. Prado, Thixotropic behavior of a Cu - eutectic Sn-Pb slurry obtained by compocasting, XVI Internacional Materials Research Congress, Cancún 20-24 Agosto 2006, Comunicación oral y escrita. Ponente.

    74. C. Merizalde, J.M Cabrera and J.M. Prado, Evaluation of the thixotropic behavior of a Cu - eutectic Sn-Pb slurry obtained by compocasting, The 9th Internacional Esaform Conference on Materials Forming, 26-28 Abril, 2006 Glasgow, Keynote. Presentación oral y escrita.

    75. A. Barba, J.M. Cabrera, M. Trujillo, C. Juárez, P. Villar y F. Pacheco, Experiencias en el empleo de prácticas virtuales para la enseñanza de materiales a estudiantes de Ingeniería, V Taller Iberoamericano sobre Educación en Ciencia e Ingeniería de Materiales, 19-21 Abril 2006, Huerta Grande, Argentina, Poster.

    76. A. Barba, M.E. Sánchez, A. Ponce, J.M. Cabrera y M. Trujillo, Realización de experiencias auxiliares en el aula y su contribución a la enseñanza de materiales a estudiantes de Ingeniería, V Taller Iberoamericano sobre Educación en Ciencia e Ingeniería de Materiales, 19-21 Abril 2006, Huerta Grande, Argentina, Poster.

    77. A. Barba, C. Juárez, P. Villar, F. Pacheco, M. Trujillo y J.M. Cabrera, La diversificación de recursos como estrategia para el mejoramiento de la enseñanza de temas de materiales a estudiantes de Ingeniería. Experiencias y propuestas, V Taller Iberoamericano sobre Educación en Ciencia e Ingeniería de Materiales, 19-21 Abril 2006, Huerta Grande, Argentina, Poster.

    78. Houbaert Yvan, Tanya Ros-Yáñez, Pablo R. Calvillo, José Barros and Leo Kestens, On the effect of texture in experimental grades of high-silicon electrical steel, International Conference on Processing and Manufacturing of Advanced Materials THERMEC 2006, Vancouver, Canada, 4-8th July 2006, participación oral

    79. Ros-Yáñez Tanya, Pablo R. Calvillo, Rafael Colás and Yvan Houbaert, Workability and straining behaviour of high silicon steel (3,0 – 6,3 wt.-% Si) by hot torsion and RT compression tests, International Conference on Processing and Manufacturing of Advanced Materials THERMEC 2006, Vancouver, Canada, 4-8th July 2006, participación oral.

    80. Rodriguez Calvillo P., A.C.C. Reis, L. Kestens and Y. Houbaert, Grain Refinement by High Temperature Plane-strain Compression of Fe-2%Si Steel, 3rd International Conference on Nanomaterials by Severe Plastic Deformation, Fukuoka, Japan, 22sd-26th September 2005, participación poster

    81. J. Calvo, J. M. Cabrera and J. M. Prado, Fracture mechanisms and ductility at high temperatures of a carbon steel, 11th Internacional Conference on Fracture, 20-25 Marzo, 2005, Turín, Italia, Comunicación oral y escrita.

    82. J. Llumà, J.A. Benito, A. Roca, J.M. Cabrera and J.M. Prado, Study of the nanometric grain size distribution in iron compacts obtained by mechanical milling, The 3rd Internacional Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD3), 22-26 September 2005, Fukuoka, Póster y Comunicación escrita. Ponente.

    83. J. Llumà, J. A. Benito, Empirical model for the time evolution thermal-depending properties of aluminium alloys, VIII International Congress on computational plasticity, p. 974-977, Septiembre 2005, Barcelona. Participación oral.

    84. R. Rodríguez, J.A. Benito, J.M. Cabrera and J.M. Prado, Mechanical response of compacted nanometric iron, Micromechanics and microstructure evolution: modelling simulation and experiments,12-16 Septiembre 2005, Madrid, Poster.

    85. A. Al Omar, A. Chenaoui, R. Dkiouak, J.M Cabrera and J.M. Prado, Microstructural evolution of two medium carbon microalloyed steels during hot forging process, Microalloying for new steel processes and applications, µas-05, Septiembre 7-9, 2005, San Sebastián, Comunicación oral y escrita.

    86. Ros-Yáñez T., P. R. Calvillo, J. Barros Lorenzo, L. Kestens and Y. Houbaert, Texture Evolution in Experimental Grades of High-Silicon Electrical Steel, VII Latin American Workshop on Magnetism, Magnetic Materials and Their Applications, Reñaca, Chile, 11-15th December 2005, participación oral

    87. Ros-Yáñez T., P. R.-Calvillo, L. Kestens and Y. Houbaert, Texture evolution in experimental grades of high-silicon electrical steel, 24th Annual Conference on Properties and Applications of Magnetic Materials ,Chicago, III., USA, 9-11th May, 2005, participación oral

    88. Ros-Yáñez T., P. R. Calvillo, J. Barros Lorenzo, D. Ruiz, R. Colás and Y. Houbaert, Study of the workability and straining behaviour of high silicon steels (3.0 – 6.3%Si) by means of hot torsion and compression tests at room temperature, Congreso Binacional SAM/CONAMET 2005, Mar del Plata, Argentina, 18th – 21st October 2005, participación oral

    89. Houbaert Y., T. Ros-Yáñez, P. R. Calvillo, J. Barros Lorenzo and L. Kestens, Texture Evolution in Experimental Grades of High-Silicon Electrical Steel, XI International Annual Conference of SOMIM, Morelia, México, September 2005, participación oral

    90. Forn A., Rupérez E., García V.G., Aplicación de Diferentes Modelos de Endurecimiento por Deformación a la Aleación 6061/22% (Al2O3)p, Tratermat 2005 (Sevilla, España), Ed. Domínguez Rodríguez A., Odriozola Gordon J.A., Gómez García D., Gutiérrez Mora F., pp. 189-194, ISBN 84-933135-1-3.

    91. J. A. Benito, I. Mejia, A. Roca, J. Jorba, Determination of the work hardening exponent by Hollomon and differential Crussard-Jaoul analysis of cold drawn ferrite-perlite steels, XIII International Materials Research Congress, 22-25 Agosto, Cancún, 2004 , Póster y comunicación escrita. Ponente.

    92. J.M. Cabrera, R. Palau y J.M. Prado, Envejecimiento por deformación de aceros de alto carbono, Jornadas de Investigación Facultad de Ingeniería 2004. Universidad Central de Venezuela. 29 Noviembre al 3 Diciembre 2004, Caracas, Venezuela, Presentacion oral y resumen. Ponente.

    93. J.M. Cabrera, F. Escobar y J.M. Prado, Efecto del contenido en carbono sobre la deformación en caliente de aceros no aleados, 15ª Conferencia de Laminación, IAS, San Nicolás, Argentina, 3-5 Noviembre, 2004, Comunicación oral y escrita. Ponente.

    94. J.M. Cabrera, R. Palau y J.M. Prado, Envejecimiento por deformación de aceros perlíticos, 2ª Conferencia sobre Usos del Acero, IAS, San Nicolás, Argentina, 3-5 Noviembre, 2004, Comunicación oral y escrita. Ponente.

    95. J.M. Cabrera, F. Escobar and J.M. Prado, Influence of the carbon content on the high temperature response of plain carbon steels, 2nd International Conference on the Thermomechanical Processing of Steels (TMP 2004), 15-17 Junio, Liege, Bélgica, 2004, Comunicación oral y escrita. Ponente.

    96. P.R. Calvillo, L. Kestens Y. Houbaert, Crystallography of Deformation Microstructures of Electrical Steels, 5th FTW PhD Symposium at Ghent University, Ghent, Belgica, December 2004, participación poster.

    97. L. Suarez and Y. Houbaert, Study of Scale Growth and Deformation during Hot Rolling Process, 5thFTW-PhD Symposium at Ghent University, Gante, Bélgica, Diciembre 2004.

    98. A. López, E. Arias, J.A. Benito, A. Roca, J.M. Cabrera y J.M. Prado, Obtención de polvo de hierro de grano ultrafino mediante severa deformación plásticas en molino de bolas, Jornadas de Investigación Facultad de Ingeniería 2004. Universidad Central de Venezuela. 29 Noviembre al 3 Diciembre 2004, Caracas, Venezuela, Poster y resumen. Ponente.

    99. J.C. Millán, A.L. Rivas, J.M. Cabrera, S. Camero and L. Kestens, Microestructure evolution of a commercial 0.04%C steel during batch annealing, XIII International Materials Research Congress, 22-25 Agosto, Cancún, 2004, Póster y comunicación escrita. Ponente.


<< Volver


Av. de les Bases de Manresa 1 - 08242 Manresa (Barcelona) · Tel. 93 877 73 73 - Fax 93 877 73 74 · E-mail: info@ctm.com.es

Aviso Legal | DISEÑOWEB NED